Hardwares

TANNOY POWERV 8 (2 pieces)

For audio professionals who demand uncompromised sound quality and flexibility, the compact POWERV8 combines Tannoy’s Dual Concentric™, point source, constant directivity drive unit with a sophisticated amplifier package integrated within the speaker cabinet.
Efficiency and performance are clearly top of the list of advantages offered by these powered loudspeakers. By eliminating speaker cables and tailoring the signal processing and amplifiers to the combined driver / enclosure system response, the POWERV8 offers increased output and reduced distortion for each watt expended. The actual installation process is simplified, as there is no need for heavy external amplifier racks, and setup is faster because fewer components need to be connected and commissioned.
A compact solution for high quality music and speech reproduction in smaller venues, this versatile loudspeaker also has, due to effective acoustic matching to the other POWERV Series models, a wide range of applications in more space-restricted areas within larger installations, including nightclub infill, theme bars, performing arts centres, high quality public address, theme parks, leisure venues, audio visual, houses of worship and ‘dry hire’ rental.
Delivering impressive levels of accuracy and performance, the POWERV8 is equipped with a highly efficient, flexible and reliable Class D power amplifier incorporating a switching power supply. The amplifier section and power supply were developed simultaneously and therefore optimally matched to minimise noise and enhance stability. The power module combines light, efficient and cool-running amplification, comprehensive driver protection and equalisation into a single compact unit. Clean, undistorted sound is delivered, even when driven at very high power levels. No cooling fans are required so the system runs quietly and is not prone to internal dust contamination.
The POWERV8 capitalises on the integrated design concept as every component part and their interaction is fully optimised. All signal processing functions have been precisely tailored; crossover frequencies and slopes, EQ, phase corrections and limiting.

Frequency Response (-3dB) (1)
Full Range Mode 80Hz – 30kHz
Frequency Range (-10dB) (1)
Full Range Mode 67Hz – 40kHz

Power 250 W RMS
Rated Maximum SPL (2) Average: 119dB

DYNACORD MADRAS M15 (2 pieces)

The MADRAS M15 mid/high frequency range is reproduced by an Electro-Voice ND6 neodymium driver with 3” voice-coil while an Electro-Voice EVX155 transmits the bass frequency range. The integrated power amplifier provides discrete low and high range channels, an integrated active frequency crossover (Linkwitz-Riley, 124Hz, 24dB/octave) and signal processing. Selecting “FULL-RANGE” or “MID-HIGH” operation is possible via switch button. A high-efficiency Class-H power amplifier provides the low range signal. Consequential use of Class-H technology reduces power dissipation, power consumption as well as the power amp’s weight noticeably. High range audio signal amplification is realized via a separate power amplifier. Both power amp blocks are convection-cooled, resulting in no disturbing noise from running fans. The power output capacity of 600W (460W + 140W) allows peak sound pressure levels of more than 128dB at lowest distortion rates. The achievable coverage range approximately doubles the scope of conventional passive loudspeaker systems. The wide radiation angle of 80°x 55° eliminates alignment problems inherent to narrow-angled speaker systems.

Max. Continuous Output Power LO (THD=1%, 400Hz) 460W
Max. Continuous Output Power HI (THD=1%, 4kHz) 140W
Max. SPL 1m (Calculated) 128dB
Frequency Range (-10dB) 50Hz…..19kHz
Crossover, Mode Switch Fullrange, positive polarity, Mid-High, positive polarity, 24dB/Octave Linkwitz-Riley 124Hz
Protection Audio limiter, High temp, DC, HF, Back-EMF, Peak-current limiters, Inrush current limiter, Turn-on delay.

DYNACORD MADRAS M18 (4 pieces)

The MADRAS M18 is an active, optimally vented subwoofer with integrated controller and Electro-Voice EVX180B woofer. The integrated controller with 124 Hz, 24dB/octave and Linkwitz-Riley characteristics and the electronically balanced XLRF-type connectors allow easy installing an active 3-way system configuration using active top-parts like for example the MADRAS M18 (in mid-high position). Frequency and phase responses of the MADRAS M18 also provide the possibility for direct parallel operation with suitable full-range cabinets. Achieving this is possible by simply feeding the MADRAS M18 Sub with a line level audio signal from a separate mixer output. Balance between MADRAS M18 Sub and top-parts can be established from the mixing console. An 800W high-efficiency class-H power amplifier provides ample power. Consequential use of class-H technology reduces power dissipation, power consumption as well as the power amp’s weight noticeably. The power amplifier is convection-cooled, resulting in no disturbing noise from running fans.

Max. Dynamic Output Power (IHF-A) 800W
Max. SPL 1m (Calculated) 127dB
Frequency Range (-10dB) 35Hz…..145Hz
Internal Crossover 24dB/Octave, Linkwitz-Riley, 124Hz, positive polarity
Protection Audio limiter, High temperature, DC, HF, Back-EMF, Peak-current limiters, Inrush current limiter, Turn-on delay, Thermal (Speaker & Amplifier)
Weight 54Kg.

DYNACORD SUB 800A (6 pieces)

The SUB 800 A is an active sub-woofer with a 15″ driver, active PowerMax stereo crossover and integrated power amplifier. The SUB 800 A can be used in parallel to an existing system to provide powerful reinforcement of the low frequency range. The integrated electronic stereo 2-way crossover, which employs PowerMax technology, divides the signal into mono-sub and stereo mid/high frequency ranges. The Mono-Sub signal, summed from the L/R channels, is directed to the integrated power amp. The recessed integrated High Efficiency power amplifier is rated at 800 watts (max. continuous output power IHF-A) and features Class H circuit topology. Driven in this way, the Electro Voice 15″ DL 15 Y woofer delivers a maximum SPL of 128 dB / 1 m. Naturally the SUB 800 A is also equipped with every known type of protective circuitry including a dynamic audio limiter, TBC, Back EMF, DC, HF and short circuit as well as thermal protections and a halogen speaker protector and thermoswitch. The enclosure of the SUB 800 A is sealed with extremely durable black structural lacquer.

Max. Dynamic Output Power (IHF-A) 800W
Max. SPL 1m (Cont.Prog.) 128dB
Frequency Range (-10dB) 45 Hz – 150 Hz
Protection Audio limiter, High temperature, DC, HF, Back-EMF, Peak-current limiters, Inrush current limiter, Turn-on delay, Thermal Brain Circuit (TBC)
Weight 43 kg.

JBL EON 15 G2 (6 pieces)

– The second generation of one of the most successful and influential professional speaker systems ever.
– 15 in Differential Drive® low-frequency driver with dual neodymium magnet for light weight and reduced distortion.
– 1 in (throat diameter) JBL compression driver with 1.75 in titanium diaphragm and ferro-fluid cooling.
– 300 W low-frequency and 100 W high-frequency (bi-amplified) – actual power delivered to the drivers.
– Built in 3-input mixer. One balanced mic/line input, two .25 in phone line-level inputs. Two-band equalization.
– Balanced loop-through/mix output. “Daisychain” additional EON speakers or send the mixed output to a mixing console.
– 60° x 90°(nominal) constant directivity horn.
– Thermomaster® Total Thermal Management System®. A single piece, cast-aluminum baffle integrates the woofer frame,horn, in MIC position) and amplifier heat sink. Air movement in the finned ports dissipates heat – no internal or external cooling fans are required.
– Rugged, light-weight, black co-polymer enclosure.

BOSE L1 MODEL ll DOUBLE BASS SYSTEM (4 systems)

Recommended for DJs and lower-range instruments and voices
Spatial Dispersion™ and Articulated Array® speaker technologies
Single-input power stand with retractable legs
Two B1 bass modules included
Bose® L1 Model II systems are our best performing, most portable amplification systems for musicians, singers, DJs and public speakers. These loudspeakers deliver wide horizontal sound coverage and our smoothest tonal balance-across the stage and throughout the room. Lightweight and modular, this sleek system fits easily into a car trunk and takes just a few minutes to set up.
Spatial Dispersion™Articulated Array speaker technologies in the loudspeaker produce wide, uniform sound coverage. The 24 small drivers are arranged using Articulated Array speaker technology in a slim, vertical enclosure-creating nearly 180 degrees of horizontal coverage and consistent tonal balance. The loudspeaker’s two-piece, interlocking design makes for quick and easy setup, breakdown and transport.
Integrated power amplifiers in the power stand provide clean, precise amplification for L1 Model II system with up to two B1 bass modules.
ToneMatch® port on power stand for digital audio and power connection to ToneMatch audio engine.
Analog input, trim control and signal/clip LED for line-level analog input via ¼” TRS phone cable. Can be used for instruments or other audio sources like DJ mixers, MP3 players, computers or DVD systems.
Bass module out for amplified bass output signal to one or two B1 bass modules. L1 system automatically adjusts equalization appropriately when bass modules are connected.
Bass line out delivers post-DSP bass signal output. Accepts ¼” TRS phone cable. Use to connect powered subwoofer, additional amplification system or Bose® PackLite® amplifier with up to two additional bass modules.
Retractable legs provide stability for streamlined L1 Model II power stand and loudspeaker. Four retractable legs fold out of power stand simultaneously for quick setup and compact transport.
Bass module
Compact, lightweight enclosure is easy to transport, set up and break down. Small footprint takes up considerably less space than traditional bass cabs required for same performance. Interlocking feet let you securely stack up to four modules together on their sides.
Highly efficient speaker design features two 5.25″ (13.3 cm), high-output, high-excursion drivers that produce deep, strong bass from a small enclosure. When connected to power stand, active equalization circuitry automatically adjusts bass signal appropriately.

BOSE PACKLITE AMPLIFIER (4 pieces)

Powerful, compact and rugged amplifier delivers 250 watts of power from a small, three-pound metal enclosure. Designed to drive up to two additional B1 bass modules running on L1 Model I or Model II systems. Recommended for anyone seeking more low-end output, including bass players, drummers and DJs.

BOSE B1 BASS MODULE (8 pieces)

This compact, powerful bass enclosure delivers the depth and impact of such instruments as bass guitars, drums, and low voices. Low-pitched wind or string instruments, guitars and keyboards can also benefit from the additional low-end output the B1 provides. Includes cable to connect module to power stand and slip cover.

BOSE TONEMATCH T1 (2 pieces)

Digital multichannel mixer designed for use with Bose® L1® sound systems
Features over 100 proprietary ToneMatch presets for instruments and microphones
Includes Bose zEQ, storable scenes and a suite of studio-class effects
Integrated ToneMatch audio engine and audio technologies provide four independent channels featuring our largest library of ToneMatch instrument and microphone presets, proprietary zEQ and a complete suite of studio-class effects and sound processors.
Proprietary ToneMatch presets optimize L1 system to match intended natural sound of specific instruments and vocal mics. Over 100 presets are organized into quick-access banks and can be independently assigned to each channel. Free ongoing updates via USB connection between your computer and ToneMatch audio engine.
Powerful multichannel sound tools for Bose L1 systems, with controls so advanced they adapt to you and your instrument. Four-channel engine features proprietary ToneMatch presets, intelligent zEQ and a large suite of professional-quality effects and processors.
The T1 ToneMatch audio engine is designed to enrich the sound of musicians using any Bose L1 system. Its powerful features and tone-shaping tools quickly bring you closer to the true sound of your voice and instruments. This versatile digital mixer helps you sound your best in live performances. It expands the input capacity of your L1 system and gives you instant access to a host of proprietary EQ presets, standard effects and processors.
Hundreds of sonic refinements-instantly
The ToneMatch audio engine puts our largest library of customized presets at your command. These ToneMatch presets instantly optimize instruments and microphones for any L1 system, all at the touch of a button.
Different presets can be independently assigned to the engine’s four channels. For example, select Audix® OM5 mic presets for channels 1 and 2, Taylor® guitar for channel 3 and Lakland® bass for channel 4-all at the same time.
Intelligent equalization: zEQ
Fine-tune your sound system with greater accuracy. Bose intelligent zEQ redefines low, mid and high ranges for each ToneMatch preset. When you need to cut or boost specific frequency ranges for different instruments and mics, zEQ gives you the power.
Suite of effects and dynamics processing
Globally assign one of five different reverbs to each mic/line channel. You can also choose from three delay types, ten additional effects, and seven dynamics processors-and assign them independently to each channel.
Custom scenes
Store your customized settings for specific gigs with the Scenes feature. The engine comes with five predefined Bose scenes and ten you can define. Fast, one-touch scene recall helps you make quick work of repeat setups.
Easy connections
Simply link the engine to a Bose L1 Model II system via the included digital cable-and rev it up. A sleek bracket is also included to attach the engine to the loudspeaker. For easy connection to a Model I or Compact system, use an analog cable and a T1 power supply.

BOSE LINK AL8 DIGITAL WIRELESS AUDIO SYSTEM (1 system)

The Bose link AL8 homewide wireless audio link is the easiest way to expand your sound system to additional rooms. This transmitter and receiver package delivers two independent digital audio streams from your system to Bose link-enabled products or amplifiers in another room. All without running room-to-room wires.
The key technology for this homewide wireless audio solution is our proprietary Free Field® circuitry. It enables the Bose link AL8 transmitter to operate efficiently in the presence of signals from cordless phones, wireless Internet connections and other devices. And it helps deliver Bose quality sound throughout your enviroment, without interruption, and with low transmission latency. This virtually eliminates the echo effect heard when a wireless signal plays back much later than the original.
The transmitter and receiver work through most walls and floors, and operate from up to 80′ away. Individual AR1 receivers (purchased separately) can be placed in seven additional rooms for wireless audio transmission from a single AL8 transmitter.
Key features:
• Wireless transmission technology easily enables audio in a second room without wiring between rooms
• Transmitter supports up to seven additional receivers (purchased separately)
• Radio frequency operation transmits digital audio from your main source to another zone
• Proprietary Free Field circuitry limits interference from other devices-like cordless phones and wireless Internet connections

BOSE LINK AR1 WIRELESS AUDIO RECEIVER (2 pieces)

The Bose link AR1 wireless audio receiver works with the AL8 wireless transmitter connected to your main audio source. If you’ve already expanded your system benefits to a second room with the AL8 homewide wireless audio link-consisting of a transmitter and receiver-this individual AR1 receiver will establish sound in yet another listening area.
The AR1 receiver accepts two independent audio streams from your AL8 system in this listening area. And there’s no room-to-room wiring required between the two.
Connect your receiver to a Bose link-enabled product and receive signals from up to 80′ away. Radio-frequency operation allows reception through most walls and floors.
The key technology for this homewide wireless audio solution is our proprietary Free Field® circuitry. It enables the AR1 receiver to operate efficiently in the presence of signals from cordless phones, wireless Internet connections and other devices. And it helps deliver Bose quality sound throughout your enviroment, without interruption, and with low transmission latency. This virtually eliminates the echo effect heard when a wireless signal plays back much later than the original.
Key features:
· Receives audio from your AL8 system in another room
· No wiring installation required
· Receives wireless signal up to 80′ from the AL8 transmitter attached to your main sound source
· Works through most walls and floors
· Proprietary Free Field circuitry limits interference from other devices-like cordless phones

BOSE PANARAY 620M MULTI-POSITION FLOOR MONITOR (1 piece)

Delivers high SPL and multiple coverage options for a variety of professional and commercial applications. It is a full-range device that includes six 2.25″ (57mm) mid-high frequency drivers in a proprietary Articulated Array® loudspeaker design, combined with two 5.25″ (133mm) woofers. The benefit of this technology is smooth, even coverage throughout the listening area.
The frequency response and controlled coverage of the Panaray 620M multi-position floor array, along with the innovative combination of cabinet shape and unique Bose technology, allows this array to be used in three different positions for almost any type of floor array application: individual mix, group mix-deep stage and group mix-shallow stage. Its sleek, unobtrusive design and recessed NL4 connectors allow for easy cable concealment, which reduces clutter on stage.
The 620M multi-position floor array is well suited for professional installations in almost any small to medium-sized stage application.
Is powered by BOSE PACKLITE AMPLIFIER.

DYNACORD CMS 1000 (1 piece)

The new Compact Live Mixing System CMS 1000 are high performance, high quality mixer with integrated digital FX processors and Dual Graphic-EQ’s.
Being perfect all-round solutions it is ideally suited for feeding professional sound reinforcement or powered speaker systems. DYNACORD CMS consoles are quickly set up. Complicated rack configuration and interference-prone wiring of several single components cease to apply. The extremely low noise and low distortion discrete microphone preamps built-in to the CMS provide excellent audio quality setting new standards in the field of professional mixer technology.
Specially designed Gain Potentiometers allow ergonomic fader control and additionally provide an extended control range of 60 dB. Group-switch-able +48V phantom power, Vocal Voicing filters, 3-channel tone control section with semi-parametric midrange, 4 AUX channels, PFL and MUTE, newly designed dust-proof ALPS-fader controls and the four almost identically laid out stereo channels with additional microphone inputs are only a few details of the professionally equipped inputs section. Master and AUX 3+4 output signals are electronically balanced and output via XLR-type connectors. Relay switching efficiently suppresses switching noise. Separate pre/post fader switching of the AUX 3+4 busses is provided within the master section. The two feedback filters in the monitor busses, the master standby switch, tape input and the two 7-band graphic equalizers, which can optionally be used for the master or AUX 3+4 busses complete the professional feature set of the master section. Two parallel operating and individually controllable 24-bit digital stereo effects units with 48-bit algorithms offer a total of 2 x 99 “live sound-optimized” presets in studio quality. Room and plate hall, echo and chorus reverb, mono/stereo delay, modulated delay effects like chorus or flanging as well as several special effects are comfortably selected via up/down keys.

BEHRINGER XENYX 1222FX (1 piece)

Premium ultra low-noise, high headroom analog mixer
4 state-of-the-art XENYX Mic Preamps comparable to stand-alone boutique preamps
Neo-classic “British” 3-band EQs for warm and musical sound
Studio-grade 24-bit stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
USB/Audio Interface included to connect directly to your computer. Revolutionary energyXT2.5 Compact music production software included; more free audio recording and editing software downloadable at www.behringer.com
7-band stereo graphic EQ allows precise frequency correction of monitor or main mixes
Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies
Breathtaking XPQ 3D stereo surround effect for more vitality and enhanced stereo image
Voice Canceller function for easy-to-use sing-along applications
4 fully equipped stereo input channels featuring 2 additional mic inputs on channels 5/6 and 7/8, 3-band EQ and input trim control
Channel inserts on each mono channel for flexible connection of outboard equipment
2 aux sends per channel: 1 pre fader for monitoring, 1 post fader (for internal FX and/or as external send); 2 multi-functional stereo aux returns
Balanced main mix outputs with gold-plated XLR connectors, headphone/control room output and stereo tape outputs
Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls
Internal autorange power supply for maximum flexibility (100 – 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
Rack mount brackets included for ultimate flexibility
High-quality components and exceptionally rugged construction ensure long life
Conceived and designed by BEHRINGER Germany

ALESIS MULTIMIX 8 USB (1 piece)

Compact, affordable 8-channel analog mixer with USB
4 high-gain mic/line inputs with phantom power, 2 stereo balanced 1/4” line inputs
100 28-bit onboard preset effects including reverbs, delays, chorus, flanging and pitch
3-band EQ per channel
Separate 1/4” balanced main and monitor outs, headphone out
Integrated USB audio interface
Mac OS X, Windows XP (32-bit) or Vista (32-bit) compatible
Steinberg Cubase LE included
Easy to attach rackmount ears available

PIONEER HDJ 1000 HEADPHONES (2 pieces)

In keeping with their legacy of bringing high-end quality products to market, Pioneer has done it again with another release – new HDJ-1000 headphones. While primarily targeted towards the Professional DJ, these stunning headphones will appeal to all serious music consumers. Whether you are a DJ, Studio Musician, Sound Engineer or just an avid listener of music, the HDJ-1000 is the answer to all your headphone needs.

• Type: Tightly closed dynamic headphones
• Frequency Range: 5 to 30,000 Hz
• Impedance: 40 Ohm
• Maximum Input: 3,500 mW
• Output Sound Level: 107 dB/mW
• Unit Type: 50 mm dome
• Plug: 3.5 mm 3P mini plug (gold-plated)
• Weight: 270g (excluding cord)
• Accessories: 06.3 mm 3P plug adapter with screw & carrying bag

PIONEER HDJ 2000 HEADPHONES (1 piece)

First up, the HDJ-2000’s high-quality frequency response is optimised for pro DJ use and ensures superb clarity with clear separation. This applies to any demanding environment, whether it’s performing in a packed club or engineering in a studio. In fact, the HDJ-2000s’ 50 mm driver units and high-flux magnets create outstanding resolution, from bass to treble, and are ideal for studio applications. Yet another neat feature is the capacity for 3,500 mW of input, which means distortion is prevented, even at sustained loud volumes. The heavy-duty build of these headphones ensures zero resonance.

High-fidelity sound and DJ optimised frequency response (e.g. clear hi-hat and kick drum separation)
Flexible lightweight magnesium swivel/fold design, great to wear and transport
Robust, heavy-duty build delivers reliability during extended use
Memory-foam padding with comfortable protein leather surface
Removable mini XLR connector allows the cord to be replaced
Convenient STEREO/MONO switch for easy monitoring
Precision matched sound for Pioneer’s DJM mixers
Radically unique style and approach to DJ headphones
Frequency response5 Hz to 30,000 Hz

DENON DN-HC 1000 S (1 piece)

Full mappable midi controller for SERATO SCRATCH LIVE
Denon DN-HC 1000 S, Midi Sub Controller for Serato Scratch Live, USB Plug & Play Connection (USB MIDI / Bus power). Track Select and Fast Search control, File Select control, SHIFT / CLR , 5 Cue and 3 Sample Player controls, Auto Loop, Loop IN / OUT, File, Browse, History, Prepare switches, tap Function, for use with all Midi file DJ Software, Durable metal Casing.

PIONEER SEP C1 (2 pieces)

Full mappable midi controller for SERATO SCRATCH LIVE &
TRAKTOR PRO

PIONEER MEP 7000 (1 piece)

The MEP-7000 is perfect for the mobile DJ who doesn’t have much space to work in and wants access to a wide variety of media. Offering the same basic functions and operations as the CDJ series, the MEP-7000 reads CD/CD-ROM/DVD-ROM as well as USB media.
Pioneer MEP 7000 – double CD/mp3/DVD player with USB/MIDI controller and FX unit. 4.3″ LCD colour display, karaoke function with CDG playback, compatible with mp3, AAC, WAV and AIFF data (CD and USB memory sticks), composite video output, hard disk drive ,CD-R/RW and DVD+/-R/RW compatibility, DJ software controlled via MIDI/USB, 3x scratch jog effects (scratch, bubble and trans), 3x DSP effects (jet, roll and wah), auto-mix for automatic mixed playbacks from a playlist, +/-6 pitch control, +/-10 BPM, ±16 BPM and WIDE control, memory cue/loop, BPM counter, digital output and monitor output, mechanical and electronic anti-shock, rackmountable.

PIONEER CMX 5000 (2 pieces)

The CMX-5000 incorporates and upgrades the functions of Pioneer’s world-renowned DJ-use CD player – the CDJ 700S/500-II – and also boasts a number of brand new functions. Clear Jog Dial Although the player is a rack mount component, this design results in a larger jog dial and display which together realize higher operability and easy visual confirmation of the current playback status. Quick Start This feature permits virtually instantaneous playback with a time lag of less than 0.01 seconds from the pause condition. Cue Functions (Cue Point/Back Cue/Auto Cue/Cue Paint Sampler) Set your own favorite playback points using the above functions. Tempo Control The playback speed can be adjusted within three kinds of range. +/- 6/10/16%. Master Tempo With this feature, you can change the playback speed without altering the music’s pitch. Loop Functions (Seamless Loop/Realtime Loop/Loop-Out Adjust/Re loop) Uninterrupted sound loops can be easily arranged, and with the Re loop function you can return at any time to a previously set loop. Playing Address The playing address allows you to check the current track’s playback situation visually in paragraph units. BPM Counter This counter measures and visually displays the current song’s BPM (Beats Per Minute). Legato Link Conversion for High Quality Sound Equipped with Pioneer’s original wide-range technology Legato Link Conversion the CMX-5000 is capable of reproducing sound frequencies above 20kHz which are lost during normal CD format playback. Vibration-Proof Memory and Construction The CMX-5000 boasts excellent vibration-resistant characteristics and prevents sound jumps with the double protection afforded by a maximum 8-second vibration proof memory and a special vibration proof construction. Slot In Thanks to this system, swapping discs is smooth and rapid, and you can say good-bye to worries about damaging the disc tray. Mix Out The CMX-5000 incorporates a Mix Out terminal that allows use even in cases where there is only one input system, the setup is restricted to a single amplifier, or there is no mixer input margin. Multi-Read This function plays back not only CD’s and CD-R’s but also CD-RW discs that are impossible to play on a conventional CD player.Digital Output The CMX-5000 is equipped with a digital output terminal. Fader Start Play/Back Cue Play Using the CMX-5000 together with a Pioneer DJ mixer, you can use the mixer’s fade, to control playback operations such as track

TECHNICS SL1210 M5G (2 pieces)

Since its introduction in 2003, many have called the SL-1210M5G the “Grand Master” of the 1200 line. In addition to the legendary Technics ruggedness and reliability, the SL-1210M5G boasts some killer one-of-a-kind features including an all-digital pitch control with a greater range, a specially constructed tone arm for improved skip resistance, an easy to adjust braking mechanism, and a black, brushed steel finish.

Exclusive Digital Pitch Control
A totally digital pitch control means your adjustments stay true from deck to deck. The SL-1210M5G also sports a greater range than earlier models. Switch easily between +/-8 and +/-16, and reset the pitch to 0 at the push of a button.

High Quality Sound
Powerful bass and clear sound thanks to High Grade OFC (Oxygen Free Coil) tone arm cable and high-grade stereo PHONO cables.

Improved Tone Arm Construction
The improved tone arm is designed to increase skip resistance. Easy to adjust height settings and a built-in anti-skate adjustment of up to 6g make the SL-1210M5G great for scratching.

Easy To Adjust Breaking Speed
It’s simple to set the breaking speed to suit your liking with the SL-1210M5G. After removing the slip mat, all it takes is a few twists of a screwdriver to go from a slow winding down to an instant halt, or anywhere in between.

Exclusive Long Lasting Blue Stylus Light
Super long lasting blue LED pitch indicators and stylus illuminator are exclusive to the SL-1210M5G

RANE SL3 SOUNDCARD (1 piece)

The Rane SL 3 is a new audio interface for SCRATCH LIVE
Like the world standard Rane SL 1, the SL 3 connects one or two standard vinyl or CD turntables to your computer and the mixer of your choice. Using regular turntables or CD players, you can scratch and mix files from your Mac or Windows computer’s CD or hard drive.
Enhanced by studio grade preamps and 24-bit audio processing, this compact new solution produces a warm punchy sound to heighten the senses. Use any combination of audio sources: control CD, control vinyl, MIDI or regular CDs and vinyl for more ?exibility than ever.
The included 12″ vinyl records and control CDs each have Serato’s exclusive and unique control signal which allows Scratch Live to track the motion of the record, simulating the same movement with digital audio. Due to Serato’s proprietary control scheme, the result is a feel and sound indistinguishable from playing vinyl.

RANE SL4 SOUNDCARD (1 piece)

The SL 4 is the first standalone DJ interface with two USB ports for seamless DJ changeover and back-to-back performances. Superior sound is delivered with high quality 96 kHz, 24-bit audio. Built-in galvanic isolation between USB and audio, with turn on/off muting, ensures that only the purest interference-free audio signal is heard. Low-latency ASIO and Core Audio drivers allow you to use the SL 4 as a studio production tool with multiple third-party software applications. The SL 4 is masterfully crafted by Rane for the discerning DJ.

SERATO SCRATCH LIVE SOFTWARE (1 piece)

Scratch Live is a DJ solution that comprises of the Serato Scratch Live software, Serato Control and hardware from Rane.
Serato Scratch Live lightened the load for the professional traveling DJ. Heavy crates of records can be exchanged into a huge library of music that can be easily transported on a computer hard drive.

It is the only digital DJ system that stays true to the art of DJing with no auto sync or effects by design.
The DJ is in control of the mix at all times, not the computer.

ECLER EVO5 (1 piece)

WINNER OF THE DJMAG.COM TECH AWARDS WORLD’S BEST DJ MIXER AWARD!

The EVO5 is the latest development by ECLER, a legendary European professional audio manufacturer with a background of 42 years designing and producing top quality professional audio products in Barcelona. The EVO5 is the perfect tool for today’s DJs and producers thanks to its unique combination of a state of the art internal 12 channel FireWire sound card, the highest digital sound quality at 24bit/96kHz, flexible MIDI control and the most powerful built-in editable effects processor available in the marketplace.
Highest quality audio
24bit/96kHz A/D conversion The EVO5 features the best digital components in the market. The external analogue signal is digitalised through a professional A/D converter at 24bit/96kHz for the highest sound quality..
There are 2 FireWire connections that work as a HUB and 12 inputs and outputs: 6 stereo inputs (CH1, CH2, CH3, CH4, MIX and PFL) and 6 stereo outputs (CH1, CH2, CH3, CH4, MIX and CH0). FireWire stereo outputs can be used for instance to route Phono or Line inputs to a PC for effects processing with your favourite software.
Fully editable effects processor
Create and save up to 64 customized effects The EVO5 features a powerful effects processor at 24bit/96kHz that can be fully edited. It features 8 basic effects: Delay/Echo, Filter, Flanger, Phaser, Transformer, Panoramic, Pitch and Reverb, and all effects parameters can be edited. Moreover the EVO5 offers the new and revolutionary possibility to chain 2 basic effects and so create complex customized effects. A total of 64 different complex effects can be created and saved. A precise BPM counter with reliability indication synchronises the effects. Another new feature is the pattern synchronisation that makes the effects oscillate in a unique and extremely creative way. There are also 2 dedicated Microphone effects: Noise Gate and Compressor (also editable). Personal effects presets can be imported and exported to a PC via FireWire with the EVO5 external software (included).
Unlimited MIDI control
A dedicated mappable MIDI control panel featuring 14 controls and 64 different layouts The EVO5 features a dedicated MIDI control panel including 10 push switches and 4 rotary encoders. Controls are fully mappable, editable and visible from a full colour screen, which turns into the perfect display for labelling the controls functions. There are 64 different layouts including different control presets for DJ software such as Traktor and Live. Moreover all mixer controls are MIDI enabled and fully editable. A total of 69 MIDI controls multiplied by 64 layouts result in 4416 different MIDI commands. Presets can be imported and exported to a PC via FireWire with the EVO5 external software (included). There is also a MIDI Clock output synchronised to the BPM counter. All MIDI information is transferred at ultra high speed thanks to the EVO5 FireWire and MIDI DIN5 interface.
Full colour TFT screen
A 320 x 240 pixels (3,5″) screen for total flexibility The EVO5 includes a 3,5 inch screen to enhance your creativity and gain total control of your mixer parameters. The screen has up to 262.144 colours and works at 6bit making the colour quality extremely high. Thanks to this integrated screen, users can easily display labels for MIDI controls, edit sound effects and mixer parameters. The screen also serves as a display for the BPM counter, the MIDI monitor, the FireWire connection and much more.
Customize your mixer
Edit EQ styles, gains, frequency ranges, fader curves and much more Most EVO5 parameters can be easily adjusted through the screen. Users can choose between Kill and Baxandall EQ styles. EQ gains and frequencies are fully editable and channel EQ can be also bypassed. Microphone Talkover and dedicated effects are also editable. On the output, users can adjust sensibility of OUT1 and OUT2 to 0dB, +3dB or +6dB, as well as assigning the REC signal to MIX or PFL. All fader shapes can be adjusted, including the crossfader, the channel faders and the effects Dry/Wet crossfader. The BPM counter can be assigned to the internal source or to the MIDI Clock, and can work on different ranges from 60 to 220 BPM. The FireWire sound card input and output levels can also be adjusted from 0dB to +18dB. Different user presets protected with password can be saved, as well as imported and exported to a PC with the external software (included).
Totally safe performance
Built-in editable output limiter The EVO5 features a limiter on output 1 or 2 for a totally safe performance. The limiter is only accessible with a special password in order to avoid that a guest DJ modifies it. The limiter can be assigned to OUT1 or OUT2, or it can be deactivated. The limit threshold goes from -20dB to +6dB. Club owners and sound engineers can feel safe thanks to this unique feature that will prevent the sound system from any damage.
Design by Giugiaro
For the EVO5 Giugiaro Italdesign has chosen the highest quality materials and an elegant yet robust black aluminium faceplate. Lettering and markings are made through a selective anodised technique that makes it ultra resistant to any wear and tear and will stand the test of time.
Made in Europe
42 years engineering and manufacturing PA systems and DJ mixers in Barcelona Founded in 1965 and manufacturing mixers since 1974, ECLER is the European leader in the design and production of DJ consoles. All our mixers are fully manufactured and tested one by one in our factory based in Barcelona, Spain. You can feel safe about our mixer performance and reliability thanks to our Made in Europe quality stamp and our experience of 42 years engineering and manufacturing high quality professional audio products.
Products that have been deemed “TRAKTOR SCRATCH Certified” are premium quality mixers with integrated audio interfaces.

PIONEER DJM 2000 (1 piece)

The DJM-2000 inherits a larger foot print than its predecessors to accommodate a sectioned layout of features as well as cosmetically match the latest Pioneer CDJ series of digital media players. On the top center section of the mixer resides its EFX capabilities to give DJs a bounty of digital effects. Located on each side of the middle section is its audio mixing controls for connection of up to four digital or USB sources. Across the middle section, Pioneer added new INST FX (Instant Instrument FX) functions which allow DJs to further alter and create more sound effects. And, at the bottom center of the mixer is a large LCD touch display that provides DJs a window for remixing beats and adding effects with the ease of a simple touch of the screen.
Industry First Multi-Touch Panel
A first in the industry for audio mixers, the DJM-2000 incorporates a full-color 5.8-inch LCD multi-touch panel for adding audio effects. Users can simultaneously manipulate the displayed controls on the panel by touching different areas of the screen. Three different performance modes are available including:
Frequency mix – Enables more precise mixing within seven frequency ranges. For example, users can enhance the bass region within the music they’re mixing.
Sidechain remix – DJs can create seven different dynamic audio effects with touches and movements on the screen.
MIDI mode – Allows the user to assign various controls displayed on the LCD screen to control DJ software via MIDI. Four types of MIDI modes are available for more performance flexibility.
Evolved Beat Effects
A section of the mixer resides an Evolved Beat Effects adopted from earlier versions of the DJM series of mixers to generate a multitude of sound effects. Numerous buttons were added for selecting multiple effects and beat parameters for additional performance capabilities. Further manipulation of the sound effects can be made using the Effect Frequency knobs that changes the low, mid and high frequency bands of the music. Turns of the knobs enhances the effects to each frequency band, i.e., an echo added specifically to the vocals of the music or a doubling of the hi-hat rhythm, providing incredible performance options.
Instant Instrument FX
The INST FX (Instant Instrument FX) provides six additional audio effects that include Noise, HPF, LPF, Jet, Zip and Crush. Each of the effects can be induced into the channel with a turn of the Filter knob. Additionally, the Parameter knob allows the effects to be fine tuned.
Pro DJ Link
When used specifically with Pioneer’s CDJ-2000 or CDJ-900 turntables via Pro DJ Link, the DJM-2000 becomes an even more powerful musical tool. The mixer incorporates four Ethernet ports in the back of the unit allowing up to four of the most recent CDJ turntables to be connected (via LAN cables) while sharing only one music-filled SD card1 or USB storage device. In addition, up to two laptop computers pre-installed with Pioneer’s music management software rekordbox™ can be interfaced with the DJM-2000 via LAN cables, in cases that two DJs are transitioning for their individual performances.
Live Sampler
A cool feature of the mixer is its Live Sampler capability which allows the sound from a microphone or from the MASTER output to be recorded directly into the mixer. The “sampled” sound can instantly be transferred via LAN cable to a CDJ-2000/900 for scratching.
Link Monitor
The music files in rekordbox™ can be monitored on headphones. This allows the DJ to check the song on rekordbox™ before playing it on a player, thus making it a smooth-flow for selecting and playing a song.
USB interface
The DJM-2000 features a USB audio interface2 that allows direct computer connection without the need for an external sound card. Up to four audio sources can be assigned to each channel providing even more flexibility. For additional convenience, the MASTER output can be connected directly to a computer for recording3 of performances.
Sound Quality
Continuing the prestigious reputation of Pioneer mixers, the DJM-2000 provides excellent sound quality. By utilizing balanced hybrid op-amp and a perfectly balanced output circuit in the analog processing stage, Pioneer managed to significantly decrease induced noise resulting in a dynamic range of 107dB with 0.004% THD for an extremely clean and powerful sound.
Additional features of the DJM-2000 include:
Switching 3-Band EQ/Isolator – Equipped with a switching 3-band EQ (+6dB to -26dB) and 3-band Isolator (+6dB to -∞dB) on each channel
Digital In – Permits audio signal of each channel with no deterioration in sound quality
Fader Start Play – Connection with CDJ player(s) with PRO DJ LINK or control cable allows the mixer to start the turntable by switching faders
Talk Over – Lowers the volume of the music when a connected microphone is used
Peak Level Meter – Displays input levels at a glance
Cross fader Assign function – Allows the flexible assignment of the input on each channel to the cross fader
Fader Curve Adjust function – Allows changes to cross fader and channel fader curves.

PIONEER DJM 600 (1 piece)

To ensure the widest possible music-making flexibility, the DJM-600 is equipped with an industry-first auto beat sampler. The sampler easily and accurately samples phrases in a BPM-linked operation along with an improved auto beat effector. In combination with Pioneer’s CDJ Series, this advanced mixer gives DJs everything they need to make party music really come alive.
AUTO BPM COUNTER, AUTO BEAT SAMPLER, AUTO BEAT EFFECTOR (DELAY, ECHO, AUTO PAN, AUTO TRANS, AUTO FILTER, FLANGER, REVERB, PITCH SHIFTER), EXTERNAL EFFECT INPUT (SEND/RETURN), FADER START PLAY, EQUALIZERS, CROSS FADER CURVE, TALK OVER, PEAK LEVEL METER, TRIM, INDEPENDENT MONITOR SWITCH, BOOTH MONITOR.

PIONEER DJM 3000 (1 piece)

Pioneer DJM3000 is a four channel professional DJ mixer designed for fixed installation in nightclubs as well as professional mobile use. The DJM3000 delivers all the routing and features necessary to satisfy seasoned DJs of all genres. Four channels provide seven line inputs for CD players, MP3 players and other line level sources. Four turntable inputs are also provided. A powerful internal effects processor provides a wide range of effects that are automatically beat-matched to the audio signal. Among the included effects are delay, auto-pan, filter, flanger, reverb, pitch shifter and more.
Other features:
AUTO BPM COUNTER, AUTO BEAT SAMPLER, AUTO BEAT EFFECTOR (DELAY, ECHO, AUTO PAN, AUTO TRANS, AUTO FILTER, FLANGER, REVERB, PITCH SHIFTER), EXTERNAL EFFECT INPUT (SEND/RETURN), FADER START PLAY, EQUALIZERS, CROSS FADER CURVE, TALK OVER, PEAK LEVEL METER, TRIM, INDEPENDENT MONITOR SWITCH, BOOTH MONITOR

Professional BATTLE DJ Mixer (1 piece)

The NUO 2.0 is a 2 channel analogue mixer addressed to the professional DJ of any kind, in despite of the music style.

It features the professional characteristics that made its predecessors acclaimed worldwide, and it equips the best analogue components available in the market place in order to obtain the highest sound performance.

Whether you play house, techno or hip hop, perform smoothly or as a scratch DJ, the NUO 2.0 will please all your needs thanks to its versatility and plenty of features, such as the precise and ergonomic full cut EQ, FX Send control per channel in pre or post fader mode, faders curve adjustments and suitability for the awarded magnetic ETERNAL crossfader for the professional scratch DJ.

Its superb sound quality and robust format, plus balanced XLR Master output and Booth output for monitoring make it also a perfect mixer for small installations.

_ 2 mixing channels
_ 1 MICRO/LINE channel
_ 2 PHONO inputs
_ 3 LINE inputs
_ Master output XLR and RCA
_ Booth output RCA
_ 3 band full cut EQ
_ Extra large ergonomic EQ knobs
_ 3 band EQ kill switches
_ FX Send control per channel
_ FX Pre/Post fader selector
_ 45mm long life VCA faders
_ 45mm long life VCA crossfader
_ Fader and crossfader shape adjustment
_ Crossfader Reverse and Cut-In

PIONEER EFX-1000 PROFESSIONAL PERFORMANCE EFFECTOR (1 piece)

High-Fidelity Sound
The high-fidelity design features 24-bit/96 kHz A/D and D/A signal converters along with a 32-bit DSP, allowing the addition of effects without lowering the original sound quality. A signal bypass function has also been incorporated.
3 Band Beat Effector
Beat effects [BPM mode]
The EFX-1000 is equipped with the same automatic BPM counter/beat effector made popular by the EFX-500, which allows effect processing on single selected bands in sync with the track tempo (BPM), for greater expressive possibilities than with conventional all-band effectors.
Beat effects [RHYTHM mode]
This industry-first rhythm effector lets you apply effects in sync with a rhythm you input yourself. With the capability of a far wider range of unique effects compared to previous beat effectors, you have the potential for a new level of DJ performance.
Digital Jog Break Function
The jog dial allows real-time control of effect sounds. Up to eight seconds of jog function can be stored in memory for automated replay. In addition to single memory plaback there is a loop mode for stored jog motion playback. When used in combination with the beat effector, up to 49 effects can be created.
MIDI IN/OUT Function
External MIDI signals (control signals and timing clock signals) can be used to control the effector and as a medium for using the effector to control a sequencer or other MIDI component.
Digital Link Function
A variety of functions can be performed by using the dedicated digital link cable to connect this unit to a Pioneer DJ mixer (DJM-1000) with digital link support.
Digital IN/OUT
Equipped with digital IN/OUT connectors at 24-bit/96 kHz sampling, the EFX-1000 allows for use in-studio track creation and other applications where high sound quality is demanded.

SHURE SHURE PGX24 BETA 58A HANDHELD WIRELESS SYSTEM (4 systems)

Includes PGX2/Beta58 Handheld Transmitter and PGX4 Diversity Receiver.
A premium live performance system that reveals fine details in demanding environments.
PGX4 Wireless Receiver
PGX Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Features:
Automatic Transmitter Setup , Automatic Frequency Selection , 90 Selectable frequencies across 18 MHz bandwidth , 1/4 wave antennas , Microprocessor- controlled diversity , Channel display LED, XLR and 1/4″ outputs
PGX2/Beta58 with Beta 58A Supercardiod Microphone
The Beta 58A microphone accentuates the warmth and clarity of lead and backup vocals. Its supercardioid design provides maximum isolation from other onstage sounds.
Features:
Supercardioid, Dynamic, Frequency response: 50 to 16,000 Hz , Neodymium magnet for high signal-to-noise output
PGX2 Handheld Transmitter
Features:
Automatic Transmitter Setup , Multi-function LED Indicator (power, lockout, mute, low battery)

IMG STAGE LINE TX-140 SET UHF WIRELESS SYSTEM MICROPHONE (2 systems)

1 microphone transmitter, 1 receiver,
Single-channel version with internal electronic switching to the antenna with the respective stronger signal (switching diversity)
Volume and squelch controls

Technical Facts Microphones
Transmitting power< 10mW
RF S/N ratio > 80dB
Audio range50-15,000Hz, 3dB
Dynamic range 100dB THD < 0.8%
Audio output0-300mV/10k
Rangeapprox. 30m

SHURE SM 58 WIRED VOCAL MICROPHONES (2 pieces)

The Shure SM58® unidirectional (cardioid) dynamic vocal microphone is designed for professional vocal use in live performance, sound reinforcement,
and studio recording. It has a tailored vocal response for a sound which is a world standard for singing or speech. A highly effective, built-in spherical
filter minimizes wind and breath “pop” noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise.

Rugged construction, a proven shock-mount system, and a steel mesh grille ensure that even with rough handling, the SM58 will perform consistently,
outdoors or indoors.

SENNHEISER e 825-S WIRED VOCAL MICROPHONES (2 pieces)

General Description
The cardioid e 825 S provides excellent feedback and spillage rejection. The rugged metal construction and internal damping isolates handling noise. Ideal for general vocal and instrument miking and club PA. Complete with silent on-off switch as standard. Unbeatable quality at an ultra competitive price.
Features
Rugged metal body
Excellent feedback and spillage rejection
Good suppression of handling noise
Balanced frequency response
Warm transparent tonal response
Silent ON/OFF switch
Rugged metal body
Excellent feedback and spillage rejection
Good suppression of handling noise
Balanced frequency response

DENON DVD DN-V100 (1 piece)

Professional rack mounting DVD Player. Compatible with DVD, DVD-R, DVD+R, VCD, HDMI, DivX, MP3 and JPEG formats. Component / S-video outputs, progressive scan. Includes rack mounting kit.
The Denon DN-V100 is the first DVD player to offer HDMI output for connection to HD ready Plasma and LCD displays. Additional features of the 2U rackmountable player include support for MP3 cds, jpegs and wma files, as well as component output and DivX file playback capability.

Highlights – Denon DN-V100 DVD Player:
Progressive Scan System
HDMI (High Definition Multimedia Interface)
Playback of Audio CD, MP3, JPEG (pictures) and WMA
Component Video Output
Playback of DivX files recorded on DVD-R/RW or CD-R/RW
Repeat playback

APPLE MACBOOK PRO 17” (1 piece)

Precision aluminum unibody, 2,666GHz Intel Core 2 Duo, 17-inch LED-backlit glossy widescreen display, Multi-Touch trackpad, High-performance graphics , 8GB memory, 320GB 7200-rpm hard drive, NVIDIA GeForce 9600M GT graphics processor with 512MB GDDR3 memory, NVIDIA GeForce 9400M graphics processor, 1920 by 1200 pixels resolution, MagSafe power port, Three USB 2.0 ports, One FireWire 800 port, Mini DisplayPort, iSight camera, backlit keyboard, ExpressCard/34 slot, SuperDrive, iWork ’09 Family Pack, Logic Express, Aperture, Final Cut Express, FileMaker Pro 10, Microsoft Office Mac 2008 – Home and Student Edition.

SONY VAIO VGN -N11S 15” (1 piece)

Windows XP, CPU Type: Intel Core Duo, CPU Speed: 1.6 GHz, Internal Memory: 2GB, Hard Drive Size: 120.0 GB, Screen Type: TFT, Screen Size: 15.4 in, Screen Resolution: 1280×800

BENQ VIDEO PROJECTOR MP610A (1 piece)

Enjoy perfect colors with the MP610’s unique color matching technology. The new generation golden ratio color wheel balances true color saturation and maximizes color accuracy. There are no limitations when using the MP610. It captures rich, true-to-life spectrums for the greatest visual experience.

Display Type: DLP projector
Aspect Ratio: 16:9, 4:3
Resolution: 800 x 600
Brightness: 2500 ANSI lumens
Color Depth: 24-bit

ANTARI Z 1000 FOG MACHINES (4 pieces)

Z-1000II dominates the entry-level of Z-Series II Fogger for high performance output necessary to scale up the machines’ efficiency. It is equipped with ECO thermal control system and patented UNICORE heater technology where the heater core can be easily draw-out from the heater block ensuring quick and easy cleaning. The heater element is like a jet air stream that can deliver a powerful fog in order to create the very best atmospheric effect. (perfect for mid-air smoke as well)
Z-1000II comes with high-quality pump and electronic low-fluid detector also known as Thermal Cut-Off (TCO), which automatically reactivates and shuts down the pump power when the fluid level is low and depleted. Other features include standard hanging bracket to facilitate in any installations or on the road from venue to venue.

Z-1000
» Power: AC100V/AC120V/AC230V/AC240V,50Hz-60Hz
» Heater: 1,000 W
» Output: 10,000 cu.ft / min
» First Heat-up Time: 5.5 min
» Tank Capacity: 1.7 liters
» Fluid Consumption Rate: 18 min / liter
» Remote Included: Z-40 (Timer Remote), Z-50(Wireless Remote)
» Weight: 6.6 Kg

STAIRVILLE SD-300 Hazer (1 piece)

Stairville SD-300 haze machine – ideal for showing off light beams and effects. Heater: 700W, output: 2000 cu.ft./min, tank: 1.0 litre, warmup time: approx. 5min. Includes timer remote control & 10m cable. Dimensions: 525 x 208 x 235mm. Weight: 8,9kg

575 HMI MOVING HEADS (4 pieces)

It is skillful designed with high quality components, many features, and is also equipped with a new micro-processor technology.
A 575 W discharge lamp and an advanced optical system create a very high lightoutput. This light weighted product is made for tours as well as for theatres, on TV, stages or big clubs.

·compact construction
·575-Watt-Discharge Lamp
·advanced optical system
·1 Goborwheel
·8 metal gobos (all interchangeable)
·7 colors + white
·motorized focus
·prism

·Lamp: HTI 575 Osram
·Average service life: 750h
·Color temperature: 7500k GE, 7500k Philips, 5600k Osram
·Luminous flux: 43.000 lm

Control
·Protocol: USITT DMX 512
·DMX-Channels: 16
·Musiccontrol: internal microphone, master-slave function, gobo-, colorchange and shutter control with music

Programming
·Internal movements
·Separate speed for Pan/Tilt
·Random strobe
·pulse effect
·colorchaser
·goboshake
·Master-Slave function
·Audiomode with different zeroposition and different sizes
·When the DMX-signal is lost the audiomode will be switched on automatically if required (especially

Laserworld CS-400G V4Laser – Green Laser (2 pieces)

Very strong green laser projector with ILDA interface for professional computer control. Fast scanner system at 30kpps allows graphics projection as well as smooth wave effects.

Laserworld CS-1500 RGB – full color laser (1 piece)

Very strong full color laser projector with ILDA interface for professional computer control. Fast scanner system at 30kpps allows graphics projection as well as smooth wave effects.

RED LASERS 250 mW (4 pieces)

Technical specifications:
§Diodes: aircooled diode with min. 200mW, max 250mW red (650nm)
§laser class: 3b
§control modes: sound control
§mirror system: high-speed stepper motors
§animations: 50 (layers, tunnels, fences, waves…)
§beam facts: 3mm/1mrad

HUNGAROFLASH STROBO 2000W turbo (1 piece)

High-Intensity Flash Tube XOP15
LIGHT FLASHES OF VERY HIGH INTENSITY! 2000 WATTS!
Pluh’n play or analog contrioller for speed & intensity

LED PAR 64 PRO FLOOR PROJECTOR 36X3W (8 pieces)

LED PAR64 Pro 36x3W Floorspot Black Short – 36x 3W high-powered LEDs with RGB colour mixing. Controlled via DMX-512, stand-alone mode or sound-to-light mode (built-in microphone). DMX connectors: 3-pin XLR in and out. Includes double bracket, mains lead and EU plug. Dimensions: 23 x 23 x 40 cm, Weight: 2.5kg

MARTIN Wizard Extreme (2 pieces)

·250 W discharge lamp
·Long lamp life (3000 hrs)
·7 interchangeable colors plus 2 open positions and twinkle effect
·13 gobos plus open (3 with dichroic reflectors)
·Manual focus
·Separate shutter for strobe effect
·Rotating and swiveling mirror drum
·All major safety approvals CE, ETL and CETL
·Rigorously tested for total reliability
·DMX, stand alone (music or auto-trig) and master/slave function
·Continuous operation – no cool down time needed
·12 pre-programmed macros for fast start-up